Houses need to be treated because it is considered to express the soul owner. Starting from the interior of the house and some parts of the home such as yard, living room, floor and walls, even the bathroom, there clearly illustrated the nature of its inhabitants, whether they are diligent and regular home care.
There are 9 ways dream home care such as cleaning the crust in the bathroom, fix floor tiles cracked / loose, fix a wet or damp floors, repairing a leaking bathroom floor, painting the walls so as not easy to peel, when necessary to repainting, to nailing the wall so as not to crack, keeping doors and window frames to be free of termites, and eradicate the fungus at home.
1. Cleaning the crust in the bathroom
Bathroom floor can be removed crusty yellow-brown in the following way: crust rubbed repeatedly with pumice soap and water, then rinsed with clean water. Citroenzuur (citric acid) was sown on the outside and inside walls or foundation that has been soaked in the tub before, let the citric acid to react for one hour. Then, brushed and flushed with clean water and rinse until completely clean. Furthermore, dry with a dry cloth. Citric acid is often called citron-shaped white powder can be obtained in stores supplies cake.
2. Repair cracked floor tiles / off
Cracked ceramic floor removable ceramic carefully so that is still intact does not come apart. Nat scraped with a sharp object. After that the couple removed or broken floor to the bottom, made a sub-floor, then a replacement floor tiles installed.
If the damaged tile grout, grout cleaned first by scraping. Then grout flush with clean water. Furthermore, the gap is filled with grout rather liquid mixture and let soak until the inside. At the time the field was still half-dry, followed by a more viscous mixture and pressed so solid. Prior to the entry and drying, the remnants of filling material scattered on the surface of the floor wiped with a dry cloth.
3. Fixing a wet or damp floors.
Improvements on a wet or damp floor is actually quite easy from unknown causes. If the infiltration of water into the surface of the floor go through the grout, grout covered with waterproof material. If it happens on the floor that is not watertight, the entire floor is wet and humid is disassembled down to the bottom urugan sand. Above urugan sand is coated with a plastic sheet over it and then coated with a mixture of water-resistant species with a ratio of 1 cement: 2 sand 3 cm thick. The floor is ready to be installed again.
4. Fix a leaking bathroom floor.
Leaks in the bathroom in the house usually comes from tile grout. Grout is often eroded by water, cleaning chemicals, soaps, or how to install tile in bathrooms that are less precise. Must be known in advance whether the ceramic stick well on the floor by floor stepped on with little pressure or a knock. If it rang out means there is a gap or cavity is empty.
5. Paint the walls so as not easy to peel.
In order for a coat of paint on the walls is not easy to peel it plamur use should be limited only as cover cracks in the walls of fine hair. Often we make the mistake of using plamur as a primer layer. Plamur material is not made to bind the paint so that if it continues to be used in the process of painting, the paint will easily peel. When painting on the wall should be chosen carefully.
If the painting done on wet conditions, the paint will take longer to dry. Similarly, if a painting done on a very hot sun conditions, the results are less good. The results of painting on the outside (surface of the wall) will dry up earlier than the inside. This potentially causes the paint cracks, bubbles or peeling. The ideal time to do the painting is in dry conditions and not when the sun is very hot.
6. Repainted if the paint has started peeling.
Repainting should be done if we find the walls of the house was calcifying. The signs can we know with menyaapukan palms on the wall surface. If we get the former white powder means the walls need to be painted again.
7. How to nail the wall so as not to crack.
Often we nailed wall frames for pocket or household accessories, but we find dingding be cracked. This happened not because of a mixture of species that are less good but because we do not know how to nail the right wall. The trick is to give the tape cross on the wall before nailing the wall surface, and then nailed to crosses in the middle of the tape earlier. Once completed, the tape is released slowly as needed.
If the wall material is less qualified, so if nailed, the wall will fall. How to fix remedy is to pour two to three tablespoons of vinegar on the walls who want nailed. Wait until dry and then the wall can be nailed.
8. Keeping doors and window frames to be free from termites.
The trick with a 3:1 mix between diesel oil and then stir until blended. The mixture is applied evenly throughout the surface of wood and diesel oil until the mixture is completely dry. Once that was done painting on wood surfaces. Can also be painted before, wood surfaces coated with anti-fungal medication to prevent attacks from termites.
9. Eradicate the fungus at home.
To overcome the fungus that attacks parts of the house on walls and ceilings or even furniture, you can use vinegar, fungicides (fungus killers) or a liquid disinfectant. The trick, vinegar soaked rag, added to the parts attacked by fungus slowly so that mold spores do not fly everywhere. Sweeping was repeated with vinegar and a new cloth. Brush is not recommended to clean the mold because it will make the spores spread to other places, for example, attached to the furniture, sofa or inhaled by humans.
If the fungus attacks the long and quite heavy, for example on the ceiling caused by leaks, and leaks immediately repaired or replaced ceiling repainted. Installation of sanitation also needs to be protected from damage and leaks that are not the cause of the fungus.
